Acura Integra Forum - Yes it's Back! banner
1 - 7 of 7 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Just took delivery on my new carbon/red integra yesterday. I didnt notice till i got home that the trim piece around HUD was not completely clipped all the way down. So I said no big deal I will just push it down and we will be good. Well the piece wont stay down and keeps popping out. I took it back to the dealer but the techs were gone for the day. Hopefully its not a molding issue and just needs to be aligned better. I guess ill find out Monday.
 

Attachments

· Registered
Integra A-Spec Tech Pkg 6M Liquid Carbon over Red
Joined
·
192 Posts
Just took delivery on my new carbon/red integra yesterday. I didnt notice till i got home that the trim piece around HUD was not completely clipped all the way down. So I said no big deal I will just push it down and we will be good. Well the piece wont stay down and keeps popping out. I took it back to the dealer but the techs were gone for the day. Hopefully its not a molding issue and just needs to be aligned better. I guess ill find out Monday.
Yay first model year early adopters! 😂🤓
 

· Registered
Joined
·
94 Posts
I hand washed and waxed my Carbon this morning and noticed the gaps on the liftback differed significantly. Right-side is 6.2mm while left is 3.4mm.
Overall panel gaps in general are larger than I would have thought was the standard in 2022. Especially the hood to fenders.
Automotive parking light Automotive tail & brake light Car Vehicle Grille
Automotive parking light Automotive tail & brake light Car Automotive side marker light Vehicle
 

· Registered
Joined
·
94 Posts
Additionally I saw an outward dimple on the top of each side of the liftback where the hinges are. Not able to capture those in photos but here you can see the blue lid of the windshield fluid reservoir through the panel gap.
Water Automotive lighting Grille Hood Liquid
 

· Registered
Joined
·
3 Posts
Same issue. It caught my eye on day two. They could have avoided this by placing the blue cap a few inches further in. Not very befitting of an “Acura.”
Additionally I saw an outward dimple on the top of each side of the liftback where the hinges are. Not able to capture those in photos but here you can see the blue lid of the windshield fluid reservoir through the panel gap. View attachment 1371
 

· Registered
Joined
·
11 Posts
One of my side windows had a vertical scratch about 10" long. It was only visible at certain angles but I noticed it. The dealer replaced the window within a few days and everything is good now. I've been keeping an eye making sure the scratch wasn't caused by the window going up and down.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top